Home > Hobby Machining > Sherline Manual Mills & Lathes >

Sherline Precision Benchtop Lathe - 3.5 x 8"



 
Our Price: $600.00

Product Code: 4000LATHE


4000 DRO Options:
  

4000 Lathe Options:
  

SAE / Metric:
  

Qty:  
Description More Photos
 
This lathe can turn a part up to 3.5” in diameter over the bed or up to 1.88” over the carriage without riser blocks. With an optional riser block, parts up to 6” in diameter can be turned over the bed. The lathe has 8” of space between centers. The electronic speed control allows continuously variable speed control from 70 to 2800 RPM without belt changes. There is a second pulley position available that offers extra torque at low RPM if needed. This lathe is a good choice for clockmakers, modelers, or those who will be working on small parts. It is also the most compact lathe we make and is easily used where space is at a premium and can be stored on a closet shelf.

Standard equipment for the model 4000 (4100 metric) lathe includes:
  • A powerful 90 VDC motor with electronic speed controller.
  • 2.75″ (70mm) x 6.0″ (152mm) crosslide.
  • 15″ (381mm) steel bed to allow 8″ (203mm) between centers.
  • Standard 1-5/8″ (41mm) laser engraved aluminum handwheels.
  • Pulleys, drive belt, faceplate, lathe dog, two dead centers, three hexagonal keys, tool post, sharpened high-speed steel cutting tool, eight-foot three-wire power cord, and instruction manual.
  • Available with red handwheels upon request.
Specifications:

  • Swing Over Bed: 3.50″ (90 mm)
  • Swing Over Carriage: 1.75″ (45 mm)
  • Distance Between Centers: 8.00″ (200 mm)
  • Hole Through Spindle: .405″ (10 mm)
  • Spindle Nose Thread: 3/4″-16 T.P.I.
  • Spindle Nose Taper: #1 Morse
  • Travel of Crosslide: 4.25″ (110 mm)
  • Tailstock Spindle Taper: #0 Morse
  • Protractor Graduations: 0° to 45° by 5°
  • Handwheel Graduations: .001″ (.01 mm)
  • Length Overall: 23.5″ (597 mm)
  • Width Overall: 10.5″ (267 mm)
  • Height Overall: 8.5″ (216 mm)
  • Shipping Weight: 24 lb. (10.9 kg
  • Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz. Click here for motor specifications
  • Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control
Please note that the pricing shown in the option popups shown above is approximate. The exact price of each package is set by Sherline, and will be reflected in the shopping cart.

Package Contents:

All Series 4000 Lathe packages include the Model 4000 (4100 metric) 3.5″ x 8″ lathe and standard accessories

For photos showing the contents of each package, click on the More Photos tab above.


Package A also includes:
  • 1041 2.5″ 3-jaw self-centering chuck
  • 1072 1/4″ tailstock drill chuck w/ key, #0 Morse arbor, #1 Morse arbor with drawbolt
Package B includes:
  • Everything in Package A plus:
  • 1074 Steady rest
  • 1191 Live Center
  • 3002 Cutoff tool and holder
  • 3007 1/4″ HSS 3-piece cutting tool set (RH, LH, boring)
  • 3020 Sherline 5/32″ T-driver
  • 3021 3-piece center drill set
  • 5327 Sherline Accessories Shop Guide Book (224 pages, B/W)
Package C (pictured above) includes:
  • Everything in Package B plus:
  • 1270 (1280 metric) compound slide
  • 3100 Thread cutting attachment
Optional DRO package:

Any Sherline lathe can be ordered with a digital readout installed. Special handwheels with built-in encoders are installed in place of the standard handwheels on the crosslide and leadscrew. These handwheels are connected to a display box that translates handwheel rotation into a readout of table position to within .0005″ (or .01 mm). In addition, a constant readout of spindle RPM is displayed. The advantage of a digital readout is that you no longer need to count handwheel rotations when moving distances longer than a single revolution. This helps eliminate math errors. The large, easy-to-read display reads out to 3 and a half decimal places to give accuracy to within .0005″. The display for each axis can be reset to zero at any time with the push of a button.

Backlash values can be set for each axis in the programming so that backlash is electronically eliminated when changing direction of handwheel rotation. A third axis is available on the display box should you later decide to add a vertical milling column or use it on a Sherline 3-axis mill.The readout can function with inch or metric lathes. In the metric mode, the position reads out to 1/100 of a millimeter.
NOTE: The unit does not translate dimensions from inch to metric. It must be initialized to work with the pitch of the leadscrew to which the handwheel is attached.

Share your knowledge of this product. Be the first to write a review »